How to Fix Samsung and Other LCD and LED TV Backlight

 How you can Repair your Samsung and other LCD and LED TV Backlight:

Let's adjusting 3v LEDs on an LED strip. The dark image in my LED TV Symptom is "No normal picture and sound." Then examine this issue in the Strip LED backlight. Since the LED Strip, the driver's output voltage is usual (open voltage is 120 DC but load voltage is 94 V Dc) but the LED strip doesn't glow. And common fault with led tv flickering on the backlight panel, or sometimes cycling ON / OFF.


A Restriction ON Equipment.





1. LED-television.
2. Driver screw (Fit for disassembly)
3. Spare LED SMD or led Strip. (Watch my Tutorial video)
4. Few Wees.
5. Fresh Same LED Strip brand.





1. Delete all screws carefully with the aid of sufficient + Screw Drivers.
2. I tested the voltage on the LED backlight connector and found that when the TV is shut down the DC Voltage falls in. This is the problem that led to the backlight.
Remove platform wire from LED connector and from LED driver hub.
3. T-Board with mother.
4. Extra care is required when removing the LED Screen Hub link. (Take care while deleting). See my Tutorial page.
5. Remove LED Strip Attachment from driver circuit backlight.
6. Driven Screen Removed.
7. I cut Defective LED Strips.
8. It addresses rectified LED strips.


Hi, If you are not able to repair your LED TV or LCD TV then you can please LED TV Repair in Jaipur before try to fix and open it.


Comments

Popular posts from this blog

LCD, LED & Plasma TV Efficient Repairing in Jaipur

Samsung Service Centre in Jaipur | Samsung LED TV Repair in Jaipur